I’m posting this basically because I know others are out there on your own. Cold and wandering through the internets looking for something about how to mod and update this device. I’m talking about the (EMC) Iomega Storecenter ix2. I picked up this little guy a little more then a year ago for some cheap money. Then I found out that they were discontinuing the model because of some pretty obvious problems.
Pretty obvious problem #1. The fan is horrible and you probably have already done something about it. Along with the fan the airflow through the device is just as bad. You can see that Iomega took a complete 180 when they came out with “the new model“** What I suggest is you get out your Dremel and cut a nice hole in the back panel. I put an over-sized ultra quiet fan with a dust filter on it. It’s already back in the closet, so I’m not getting a picture of it… Hell, you don’t want to see a picture of it. It’s a 80mm PC fan bolted to the back of a $200 NAS drive. It’s goofy looking utilitarian hardware that needs to be in the closet. Let the sexy laptops and iPods take the credit while the hacked Linux device with wires and fans all over it gets the job done. *cough **For reasons of ‘search’ the next model up is the ‘eye ex two hundred’
Problemo #2. I have been looking for a USB aware UPS (Uninterruptible Power Supply) for this device from day one. Having a ‘self aware’ storage device is pretty cool. Enable write caching and don’t worry when the power goes out when your in Tahiti. I finally obtained a Tripp Lite UPS and replaced the battery on it. Fresh USB cable plugged in and – nothing. Then it gets worse. I restart the device and it just hangs. So – Are you having a problem where your Storcenter ix2 won’t recognize your Uninterruptible Power Supply?
Final Problem #3. Every time you try to search for Iomega Storcenter ix2 (or maybe storecenter?) you get a thousand ‘re-view’s’ of how awesome it is and nothing about helping you solve issues or fix problems. Even after you use a crazy Google search like this…
I’m here to help!
Not with the fan though – you’re clever, you’ll come up with something.
Good news / Bad news. You hit ‘update’ and your device tells you that you have the latest firmware! You don’t. The latest firmware would be 126.96.36.199099 or higher. The good news is that along with potentially fixing the UPS not recognized problem, you will get the torrent downloader. This means that while your desktop is off and not using 500watts an hour your little ix2 can stay busy getting ‘the latest release of Fedora’***.
***or movies and pr0n.
Other bad news is you’re going to have to sign up to the Iomega site with an email. It’s not nearly as bad as Cisco is – but you have to get a valid email. Or an alias that forwards to your real email that you can shut down after you hit accept.
While your doing that – Might as well sign up for the Iomega Support Forums Lots of moderated fun in there…
Backup your data. Hack the fan. Load the firmware file and hit update. Wait a while in a panic. Login. Connect your UPS. Hopefully it now recognizes it! Torrent movies and pr0n. Set quotas. Oh – and because it can’t possibly all be good. You will lose the ability to get email updates from the unit… This is a gem – exhange??
Update – I got SSH access! Easy as HTML. Here’s how you get SSH access to your ix2. Now to FIX the email notification port and configuration… Initial look tells me that it doesn’t use sendmail